Absorbers (For Wall or Ceiling Mount/Suspension)

Core: Ultra Impact Fiberglass Absorber Panel 

(1/16 Perforated Co-Polymer Face)
Finish: Fabric
Sizes: Up to 4' x 10'
Mounting: Impale Clips & Adhesive 

2-Part Z Clips, Z-Clip & Track, Roto-Fast Snap-On
Thickness: 1-1/16” (.85 NRC) 1-9/16” (.90 NRC) 

2-1/16” (.90 NRC) 3-1/16” (1.10 NRC) 4-1/16” (1.10 NRC) 
Density: 6-7 pounds per cubic foot with 1/16”

Perforated Co-polymer face layer.
Edges: Chemically Hardened (square). 

(Square)
Flammability: Class "A" per ASTM E84
Mounting Surface: Vertical or Horizontal
Application: Ultra Impact Absorber Panel
Product Type: Absorber - Interactive 

Absorber or Diffuser - Wall Panel

Core: Impact Tackable Fiberglass Absorber Panel

(1/8" Tackable Face)

Finish: Fabric 

Sizes: Up to 5’ x 10’

Mounting: Impale Clips & Adhesive

2-Part Z Clips, Z-Clip & Track, Roto-Fast Snap-On

Thickness: 5/8" (.55 NRC) 1-1/8 (.85 NRC) 1-5/8” (.90 NRC) 

2-1/8 (1.05 NRC) 3-1/8 (1.10 NRC) 4-1/8" (1.10 NRC)

Density: 6-7 pounds per cubic floor with 1/8"

Impact Resistant 16 pcf Tackable Face

Edges: Chemically Hardened (square). 

All Edge Details Available (Square, Beveled, Radius, Mitered)

Flammability: Class “A” per ASTM E84

Mounting Surface: Vertical or Horizontal

Application: Basic Impact Tackable Absorber Panel

Product Type: Absorber - Interactive 

Absorber or Diffuser - Wall Panel

Core: Fiberglass Absorber Panel
Finish: Fabric
Sizes: Up to 4’ x 10’
Mounting: Impale Clips & Adhesive

2-Part Z Clips, Z-Clip & Track, Roto-Fast Snap-On
Thickness: 1/2" (.55 NRC) 1” (.80 NRC) 1-1/2” (.90 NRC) 2” (1.05 NRC) 

3” (1.10 NRC) 4” (1.10 NRC)
Density: 6-7 pounds per cubic foot
Edges: Chemically Hardened 

All Edge Details Available (Square, Beveled, Radius, Mitered)
Flammability: Class "A" per ASTM E84
Mounting Surface: Vertical or Horizontal
Application: Basic Absorber Panel
Product Type: Absorber - Ceiling Panel - Interactive Absorber or Diffuser - Wall Panel

 Available on the Model W-107 is a series of cuts on the backside of the panel which creates a flexible panel that will conform to radius or curved surfaces to a minimum of a 4 foot radius. The spacing and depth of the cuts determine the flexibility of the panel. The radius dimension is required when ordering panels with this option.